Left Lower Cover

Caution Be careful not to damage the plastic guides on the inside of the lower left
cover. They are part of the Duplex Unit paper path.
1Remove the Diverter Assembly access door (see Figure 6-13).
2Remove (2) screws, CH102 (Figure 6-7, callout 1)
3Press down firmly on the top cover outer ends to release the retaining tabs
on the inside of the cover (Figure 6-7, callout 2), and the retaining tabs at
the lower edge of the cover (Figure 6-7, callout 3).
4Pull the cover away from the chassis, left side first.
To Reinstall:
1Tuck the right side of the cover behind the plastic edge piece first.
2Slide the cover toward the chassis and insert the two retaining tabs into
position. Lift up to snap the cover into place.
Left Lower Cover
Figure 6-7
6-22 Removal and Replacement