Laser/Scanner Assembly

Caution The Laser Scanner diode is extremely sensitive to ESD.
1Remove the toner cartridge.
2Remove the top cover (see Figure 6-8).
3Unplug three cable connectors (Figure 6-26, callout 1).
4Re-route the cable running across the top of the assembly so that it is out of the way.
Caution Do not touch the scanner mirror located under the forward edge of the assembly.
Use approved ESD handling procedures when touching the Beam Detect PCA.
5Remove (4) screws, CH105 (Figure 6-26, callout 2).
To Reinstall:
Make sure that the locator pins are properly seated.
Laser/Scanner Assembly
Figure 6-26
6Removal and
Replacement
Removal and Replacement 6-41