EXP Computer C4077-90960 Rollers: Tray 2 & 3, Pickup, Feed, and Separation

Rollers: Tray 2 & 3, Pickup, Feed, and Separation
Note There are three rollers for each tray: The Pickup Roller, the Feed Roller,
and the Separation Roller. The Feed and Separation Rollers are
interchangeable with each other and between trays. The Pickup Rollers are
interchangeable between trays.
•Tray 2 Pickup Roller: Figure 6-47, callout 1
•Tray 2 Feed Roller: Figure 6-47, callout 2
•Tray 2 Separation Roller: Figure 6-47, callout 3
•Tray 3 Pickup Roller: Figure 6-47, callout 4
•Tray 3 Feed Roller: Figure 6-47, callout 5
•Tray 3 Separation Roller: Figure 6-47, callout 6
1Remove Trays 2 and 3.
Note The Feed and Separation rollers have protruding tabs, and the pickup
rollers have recessed retaining tabs. Be careful not to lose the plastic
torque limiters located behind the Separation Rollers (Figure 6-47 callout 7).
2From inside the tray cavity, remove the rollers by pinching the retainer tabs
together and sliding the roller off the shaft.
Tray 2 and 3, Pickup, Feed, and Separation Rollers
Figure 6-47
6-60 Removal and Replacement