Paper Tray

1Remove all unused paper from the tray.
2Remove the Transfer Assembly (see Figure 6-64).
3Remove the left cover (see Figure 6-54) and the right cover (see Figure 6-55).
4Remove (1) screw, CH108 (Figure 6-57, callout 1) and the metal retaining
tab from each side of the chassis.
Caution Support the rear of the tray when removing it.
5Slide the tray straight out of the chassis.
Tray 4, Paper Tray
Note If the print starts too close to the edge of the paper, see "Tray 4 Adjustment
Procedure" in Chapter 4 to adjust the paper.
Figure 6-57
6Removal and
Replacement
Removal and Replacement 6-71