Hinges

1Remove the Stapling Unit Assembly (see Figure 6-91).
2Remove the Top Cover Assembly (see Figure 6-97).
3Remove the Stapling Bed Assembly (see Figure 6-98).
4Release the brushes bar from the retaining notches and lift upwards.
5Remove (2) screws joining each hinge to the housing (see Figure 6-99,
callout 1).
6Disconnect the (2) cables in the hinge containing cables from the Stapling
Unit Controller PCA (see Figure 6-95, callout 2).
Figure 6-99
6Removal and
Replacement
Removal and Replacement 6-109