Connecting to the MIDDLE of a LocalTalk

Network

Connecting to the MIDDLE of a LocalTalk Network (1 of 2)
1Disconnect the printer from its power source. Insert the new connector box
cable into the LocalTalk port of the printer.
2Insert one end of the new cable into the connector box.
3Place the other end of the new cable next to a connector box on the network.
4Unplug one cable from the connector box on the network.
Connecting to the MIDDLE of a LocalTalk Network (2 of 2)
5Insert the new cable into the connector box on the network.
6Insert the cable you removed from the network into the new connector box.
Then, reconnect the printer to its power source.
Figure B-3
Figure B-4
B-4 I/O Information