EXP Computer C4077-90960 Setting the Fuser Mode Using PJL Command

STD
PAPER HEAVY PAPER1 HEAVY PAPER2 CARD STOCK1 CARD STOCK2 CARD STOCK3
Typical copy/bond paper,
labels, envelopes, and
transparencies.
Supports 20-28 lb Bond
media.
Heavier copy/bond paper,
labels.
Supports 28-36 lb Bond
media.
Heavier copy/bond paper,
labels.
Supports 36-42 lb Bond
media.
Cardstock, heavy paper.
Minimum media we ig ht
supported is 90 lb Index
43 lb Bond.
Cardstock heavy paper.
Minimum media we ig ht
supported is 90 lb Index
43 lb Bond.
Cardstock heavy paper.
Minimum media weight
supported is 90 lb Index
43 lb Bond.
Note Any preprinted media, labels or envelopes must have inks, coatings or
adhesives that withstand temeratures up to 215° C. Refer to the HP
LaserJet Printer Family Paper Specification Guide for more complete media
specifications.
Setting the Fuser Mode Using PJL Command
The printer default can be set using the following command:
<ESC>%-12345X@PJL<CR><LF>
@PJLDEFAULTFUSER=STDPAPER<CR><LF>
<ESC>%-12345X<CR><LF>
The range choices are as follows:
STDPAPER
HEAVYPAPER1
HEAVYPAPER2
CARDSTOCK1
CARDSTOCK2
CARDSTOCK3
Table 3-4 Initial Fuser Mode Recommendation
3Operating
Overview
Operating Overview 3-9