Pickup Assembly Photosensors
There are three photosensors on the Pickup Assembly:
•one to sense that the Transfer Assembly is closed (Figure 6-60, callout 1).
•one to sense that the tray has raised the paper to the proper height
(Figure 6-60, callout 2).
•one to sense that the tray is empty (Figure 6-60, callout 3).
To remove a photosensor:
1Remove the Pickup Assembly (see Figure 6-59).
2Unplug the connector from the sensor.
3Release the side-oriented retaining tabs and rotate the sensor to free the
end-oriented retaining tabs on the opposite end.
Tray 4, Pickup Assembly Photosensors
Figure 6-60
6-74 Removal and Replacement