Message Error
Log
Category/
Message
Description Recommended
Action
WARMING UP Status The Fuser is warming up and the printer is
not ready. It may be necessary to display the
error log to determine if more information is
available to assist you in troubleshooting.
Wait until the printer signals ready
to accept data. The user may
access the menus before the
printer goes online. If this
message remains displayed,
separate all accessories from the
printer. Cycle power and recheck
messages. If no error, replace
accessories one at a time.
Recycle power. If message
persists, replace the Formatter.
Replace the DC Controller.
Replace the Power Supply.
Table 7-5 Printer Control Panel Messages (continued)
7
Troubleshooting
Troubleshooting 7-35