Door Assembly, Diverter

1Open the Diverter access door and release the support struts (Figure 6-13,
callout 1) by sliding the strut ends forward and downward.
2Rotate the door up to align the flat sides of the right hinge pin with the
retaining slot (Figure 6-13, callout 2), and lift upwards to release it from the
retaining slot.
3Continue lifting up on the right side of the door while pushing it to the left
to rotate the left hinge pin out of its locating cavity.
To Reinstall:
1Insert the left side of the door into position first, and then rotate the right
side down to snap the hinge pins into position.
2Reconnect the support struts to the chassis.
Diverter Door Assembly
Figure 6-13
6-28 Removal and Replacement