Port data to Microsoft Windows Mobile 6.1
If you were using a different device prior to purchasing HP iPAQ, you can port the existing data in that device to Microsoft Windows Mobile 6.1.
To port data to Windows Mobile 6.1:
1.Make sure that you have Microsoft Outlook 98 or later is installed on your computer.
NOTE: In order to synchronize, Microsoft Outlook must be set as your default
2.Switch synchronization from your synchronization software to Outlook. See the documentation provided with your device.
3.Synchronize your existing device with Outlook.
NOTE: Use the latest synchronization software to synchronize your existing device with Outlook. To synchronize your existing device with Outlook, see the documentation provided with that device.
4.Synchronize the information from Outlook to your HP iPAQ.
NOTE: Disconnect the existing device before you synchronize your HP iPAQ.
Troubleshoot synchronization issues
The following symptoms might indicate synchronization issues for Windows Vista:
●WMDC does not launch even after installation.
The following symptoms might indicate synchronization issues for Windows XP:
●No ActiveSync tone plays (or 
gray icon displays), and there is no activity in the ActiveSync window on your computer.
●The ActiveSync tone plays, and the ActiveSync icon on your computer changes to 
swirling green icon. The Retrieving settings message displays on your computer, but the ActiveSync connection drops before establishing the partnership.
●ActiveSync is searching for a connection but cannot establish one. (The 
green icon on your computer continues to spin.)
●Synchronization has been established between your HP iPAQ and computer but the connection is dropped. (The 
green icon on your computer stops spinning and grays out.)
●A firewall or other network protection software message box is displayed for ActiveSync to access the network or Internet.
Port data to Microsoft Windows Mobile 6.1 79
