HP MFP Sending Software 4.0 to 4.20 Using the send-to-folderfeature, features Software, To configure Analog (embedded) fax

2.Select MS Windows 2000 Fax from the drop-down list on the Fax tab.

features Software

Figure 3-9Configuring Windows 2000 fax

3.Click Fax Properties. The Windows Fax Console dialog box appears. Use the Tools menu to configure any settings, if needed.

4.Click Apply to save the Windows 2000 fax settings.

To configure Analog (embedded) fax

HP DSS can be used to configure the settings for the embedded analog fax modem in an MFP. Use the Send to Fax tab in the MFP Configuration interface to configure these settings on individual MFPs. See Send to Fax tab for information about this tab.

Using the send-to-folder feature

If the send-to-folder feature is configured as part of HP DSS, users can scan files and send them to folders on the network. Supported operating systems for folder destinations are Windows 98, Windows NT, Windows 2000, Windows XP, Windows 2003, and Novell NetWare.

36 Chapter 3 Software features ENWW