Maintenance Analysis Procedures 3-9
Maintenence Analysis Procedures
10
Inspect the Event Log to obtain failure reason codes:
a. Select Event from the Logs menu at any view. The Event Log
displays.
b. Record the event code and associate d da te, time, and severity
(Informational, Minor, Major, or Severe).
c. If multiple event codes are found, record all codes and severity
levels. Record the date, time, and sequence, and determine if all
codes are related to the reported problem. Begin fault isolation
with the most recent event code with the hi ghe st severity level.
Other codes may accompany this event code, or may indicate a
normal indication after a problem is recov ere d.
Were one or more event codes found?
NO YES
↓Go to Table 3-3 to obtain event codes. Exit MAP.
Return to step 1 and perform fault isolation again . If this is the
second time at this step, perform a data collection and cont act the
next level of support. Refer to Coll ect Maintenance Data. Exit MAP.
MAP 0100: Power Distribution Ana lys is
This MAP describes fault isolation for the product power distribution
system, including defective AC power cords or redundant power
supplies. The failure indicator is inability of the product to pow er on.
1
Inspect and verify facility power is within specifications:
• One single-phase connection for each po we r supply.
• Input power between 100 and 240 VAC, at least 5 amps.
• Input frequency between 47 and 63 Hz.
Is facility power within specifications?
YES NO
↓Ask the customer to correct the facility power problem. When
corrected, continue to the next step.