![](/images/new-backgrounds/1264875/26487549x1.webp)
25
Chapter 4
Working with mailboxes
Adding a Subscriber mailbox
Assign all Subscriber mailboxes mailbox numbers that begin with the same digit. This helps you to identify the mailbox type. If the system times out before you enter all the values for a mailbox, use the procedures in “Changing a mailbox” on page 32 to finish setting up the mailbox.
To add a Subscriber mailbox
Log:
QUIT RETRY OK
1Press ≤·°‹.
Enter the System Administrator Mailbox number and password, and then press OK.
Admin
MBOX AA OTHR
2Press MBOX.
Mailbox Admin
ADD DEL CHNG
Mbox:
RETRY QUIT
3Press ADD.
4Enter the mailbox number.
Type:subscriber
NEXTOK
Ext:
RETRYOK
Service class:
RETRYOK
Name:
RETRY BKSP OK
Directory?
YES NO
Msg waiting?
YES NO
Outdial: <none>
CHNGNEXT
5Press OK.
6Enter the extension number.
7Enter a Class of Service from 1 to 16.
8Enter the mailbox owner’s last name, press ££, enter the mailbox owner’s first name or initial, and then press OK.
The name can be a maximum of 16 characters.
For information on entering names using the telephone dialpad, refer to “Using the dialpad” on page 12.
9Press YES if you want the Subscriber’s name to be included in the Company Directory.
10Press YES if you want the Subscriber to have Message Waiting Notification.
11Press NEXT if you do not want to assign outdialing and go to step 15 or
press CHNG.
CallPilot 150 Telephone Administration Guide