![](/images/new-backgrounds/1264875/264875139x1.webp)
70 Chapter 7 Working with CCR Trees
Adding a Mailbox node
Adding a mailbox node gives callers a mailbox where they can leave a message or listen to an Information message, depending on the mailbox type. You create a Mailbox node by giving it a Path number and assigning a mailbox number. You can add a Mailbox node to a CCR Tree at any time.
A mailbox cannot receive messages until it is initialized. For information on initializing mailboxes, see “Initializing a mailbox” on page 24.
To add a Mailbox node
Log:
QUIT RETRY OK
1Press ≤·°‹.
Enter the System Administrator Mailbox number and password, and then press OK.
Admin
MBOX AA OTHR
Admin
GLIST CCR
CCR Admin
ADMIN
CCR tree:
RETRYOK
2Press OTHR.
3Press CCR.
4Press ADMIN.
5Enter the number of the CCR Tree you want to add a Mailbox node to and press OK.
Tree: x
CHNG PRINT QUIT
6Press CHNG,
Path:
RETRY END OK
7Enter the Path number and press OK.
For example, to create a Mailbox node on the second level of a CCR Tree, enter ⁄⁄. The first 1 is the path of the first level Menu node. The second digit is the path where you want to create the Mailbox node.
x
MENU INFO OTHR
8Press OTHR.
x
XFER LVMSG OTHR
9Press LVMSG.
Mbox:
DIRQUIT
10Enter the mailbox number or
press DIR to access the Company Directory.
P0919416 03