![](/images/new-backgrounds/1264875/264875159x1.webp)
80 Chapter 7 Working with CCR Trees
Changing a Mailbox node
To change a Mailbox node
Log:
QUIT RETRY OK
1Press ≤·°‹.
Enter the System Administrator Mailbox number and password, and then press OK.
Admin
MBOX AA OTHR
Admin
GLIST CCR
CCR Admin
ADMIN
CCR tree:
RETRYOK
2Press OTHR.
3Press CCR.
4Press ADMIN.
5Enter the number of the CCR Tree that you want to change and press
OK.
Tree: x
CHNGQUIT
Path:
RETRY END OK
xLvMsg
CHNG ERASE OK
Mbox: xx
CHNGNEXT
Mbox:
DIRQUIT
6Press CHNG.
7Enter the Path of the node you want to change and press OK.
8Press CHNG.
9Press CHNG.
10Enter the new mailbox number.
Make sure the mailbox is initialized before you assign it to a CCR Tree.
Dest: <xxxx>
CHNGOK
11Press OK if you want to accept the assigned destination type or
press CHNG and assign a new destination type.
Path:
RETRY END OK
Tree: x
SAVE PRINT QUIT
Save as tree x
YES OTHR QUIT
Tree saved
CCR Admin
ADMIN
12Press END.
13Press SAVE.
14Press YES.
15This display appears briefly.
16Press ®to end the session.
P0919416 03