![](/images/new-backgrounds/1264875/264875179x1.webp)
90 Chapter 9 CallPilot operations
Initializing CallPilot
You must initialize CallPilot immediately after you reset the system.
To initialize CallPilot
Log:
QUIT RETRY OK
1Press ≤·°‹.
2Enter ¤flfl‹››(Config) and press OK.
App: Voicemail
CHNGNEXT
Bilingual?
YES NO
Primary lang?
ENG FRE
Group lists? Y
CHNGNEXT
Group lists? Y
CHNG NEXT
3Press NEXT.
4Press YES or NO.
If you do not choose bilingual operation, step 5 does not appear.
5Select a primary language.
6Press CHNG to toggle between Y and N. Select Y if you want to enable Group Lists.
7Press NEXT.
If you do not enable Group Lists step 11 does not appear and you go to step 12.
Leading digit: 9
CHNGNEXT
8The default Group List leading digit is 9.
Press CHNG if you want to enter a new Group List leading digit or
press NEXT.
Primary UI: xxx
CHNGNEXT
9If you want to change the primary interface press CHNG or
Press NEXT.
Primary UI: CP
CHNGNEXT
Primary UI:NVM
CHNGNEXT
10Press NEXT.
11Press CHNG to toggle the setting between Norstar Voice Mail and CallPilot
and press NEXT.
System config
RETRYOK
Configuring...
12Press OK.
13The display shows Configuring...
Initialization takes about three seconds.
P0919416 03