•SNMP V3
•Security Level
•UDP Port
•Filter Name
•Timeout
User’s Manual of
SNMP V1, which indicates SNMP Version 1 traps are sent.
SNMP V2, which indicates SNMP Version 2 traps are sent.
This enables SNMPv3 as the Notification Recipient. Either SNMPv1.2 or SNMP V3, enabled at any one time, but not both at the same time. If SNMP V3, which is enabled, the User Name and Security Level fields are enabled for configuration:
•User Name - defines the user to whom SNMP notifications are sent.
Defines the means by which the packet is authenticated. The possible field values are:
•No Authentication. Indicates the packet is neither authenticated nor encrypted.
•Authentication, which indicates the packet is authenticated.
•Privacy, which indicates the packet is both authenticated and encrypted.
Displays the UDP port used to send notifications.
The default is 162.
Indicates if the SNMP filter for which the SNMP Notification filter is defined.
Indicates the amount of time (seconds) the device waits before resending informs.
The default is 15 seconds.
• Retries | Indicates the amount of times the device resends an inform request. |
| The default is 3 seconds |
|
|
|
|
Use the 
button when you want to add the Notification Recipient configuration to the relevant table at the
bottom of the screen.
Figure
- 135 –