User’s Manual of WGSD-1022/WGSD-8000

ƒstartup direction — The alarm that may be sent when this entry is first set to valid. If the first sample (after this entry becomes valid) is greater than or equal to the rthreshold, and direction is equal to rising or rising-falling, then a single rising alarm is generated. If the first sample (after this entry becomes valid) is less than or equal to the fthreshold, and direction is equal to falling or rising-falling, then a single falling alarm is generated.

ƒowner name — Enter a name that specifies who configured this alarm. If unspecified, the name is an empty string.

Default Configuration

The following parameters have the following default values: type type — If unspecified, the type is absolute.

startup direction — If unspecified, the startup direction is rising-falling.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the following alarm conditions:

ƒAlarm index — 1000

ƒVariable identifier — abc

ƒSample interval — 360000 seconds

ƒRising threshold — 1000000

ƒFalling threshold — 1000000

ƒRising threshold event index — 10

ƒFalling threshold event index — 20

Console (config)# rmon alarm 1000 abc 360000 1000000 1000000 10 20

5.19.6 show rmon alarm-table

The show rmon alarm-tableuser EXEC command displays the alarms summary table.

Syntax

show rmon alarm-table

Default Configuration

This command has no default configuration.

- 281 –