User’s Manual of WGSD-1022/WGSD-8000

Product Feature

¾Physical Port

WGSD-1022

…8-Port 10/100Base-TX RJ-45

…2 10/100/1000Base-T RJ-45

…2 SFP slots, shared with Port-9(g1) and Port-10(g2)

…Console interface for Switch basic management and setup

WGSD-8000

…8-Port 10/100/1000Base-T RJ-45

…2 SFP slots, shared with Port-7 and Port-8

…Console interface for Switch basic management and setup

¾Layer 2 Features

…Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard

…Supports Auto-negotiation and half duplex/full duplex modes for all 10Base-T/100Base-TX and 1000Base-T ports.

…Auto-MDI/MDI-X detection on each RJ-45 port

…Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)

…High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth

…8K MAC address table, automatic source address learning and ageing

…1Mbit embedded memory for packet buffers

…Supports IEEE 802.1Q Tagged based VLAN

…GVRP protocol for VLAN Management

…Support up to 4 Trunk groups, each trunk for up to maximum 4 port with 800Mbps bandwidth(Duplex Mode)

…IEEE802.1d, IEEE802.1w, classic Spanning Tree Algorithm or Rapid Spanning Tree support

…Supports the IEEE 802.1s specification for multiple spanning trees on a single port (spanning tree per VLAN).

¾Quality of Service

…4 priority queues on all switch ports.

…Support for strict priority and weighted round robin (WRR) CoS policies

…Support QoS and bandwidth control on each port

…Traffic-policing policies on the switch port

¾Multicast

…Support IGMP Snooping v1 and v2

…Port Mirroring to monitor the incoming or outgoing traffic on a particular port

¾Security

…802.1x Port-Based Authentication

…IP-Based Access Control List (ACL)

…MAC-Based Access Control List

…Port Security

¾Management

-15 –