Planet Technology WGSD-1022, WGSD-8000 Syntax, Syntax, Example, 5.7.5 speed, Command Mode, Command Mode, User Guidelines, 5.7.4 description, Default Configuration, Default Configuration

User’s Manual of WGSD-1022/WGSD-8000

5.7.4 description

The description interface configuration command adds a description to an interface. To remove the description use the no form

of this command.

Syntax

description string

no description

ƒstring—Comment or a description of the port up to 64 characters.

Default Configuration

By default, the interface does not have a description.

Command Mode

Interface Configuration (Ethernet, port-channel, out-of-band Ethernet) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example adds a description to the Ethernet e5.

Console(config)# interface ethernet e5

Console(config-if)# description RD_SW#3

5.7.5 speed

The speed interface configuration command configures the speed of a given Ethernet interface when not using auto-negotiation. To restore the default, use the no form of this command.

Syntax

speed {10 100 1000}

no speed

ƒ10—Configures the port to 10 Mbps.

ƒ100—Configures the port to 100 Mbps.

ƒ1000—Configures the port to 1000 Mbps.

Default Configuration

Maximum port capability.

Command Mode

Interface Configuration (Ethernet, port-channel, out-of-band Ethernet) mode

- 203 –