User’s Manual of WGSD-1022/WGSD-8000

To return to the untrusted state, use the no qos command to apply best effort service.

Example

The following example configures the system in basic mode to DSCP trust state.

Console (config)# qos trust dscp

5.17.9 qos trust (Interface)

The qos trust interface configuration command enables each port trust state while the system is in basic mode. To disable the trust state on each port, use the no form of this command.

Syntax

qos trust

no qos trust

Default Configuration

Each port is enabled while the system is in basic mode.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

Use no qos trust to disable the trust mode on each port.

Use qos trust to enable trust mode on each port.

Example

The following example configures port e5 in basic mode to default trust state (CoS).

Console (config)# interface ethernet e5

Console (config-if) qos trust

5.17.10 qos cos

The qos cos interface configuration command configures the default port CoS value. To return to the default setting, use the no form of this command.

- 265 –