User’s Manual of WGSD-1022/WGSD-8000

Default Configuration

Forward

Command Modes

Interface configuration (VLAN) mode

User Guidelines

If routers exist on the VLAN, do not change the unregistered multicast addresses state to drop on the routers ports.

Examples

This example enables forwarding unregistered multicast addresses within VLAN 8.

console (config)# interface vlan 8

console (config-if)#bridge multicast forward-unregistered add ethernet 1- 9

5.4.6 bridge multicast forbidden forward-unregistered

The bridge multicast forbidden forward-unregisteredinterface configuration command forbids a port to be a Forwarding-unregistered-multicast-addresses port. Use the no form of this command to return to default.

Syntax

bridge multicast forbidden forward-unregistered {add remove} {ethernet interface-listport-channel portchannel-

number-list }

no bridge multicast forbidden forward-unregistered

ƒadd — Forbid forwarding unregistered multicast packets.

ƒremove — Don’t forbid forwarding unregistered multicast packets.

ƒinterface-list — Separate nonconsecutive Ethernet ports with a comma and no spaces; use a hyphen to designate a range of ports. (Range: Valid Ethernet port)

ƒport-channel-number-list — Separate nonconsecutive port-channels with a comma and no spaces; use a hyphen to designate a range of port-channels. (Range: Valid Port-channel number)

Default Configuration

Not forbidden

Command Modes

Interface configuration (VLAN) mode

User Guidelines

There are no user guidelines for this command.

- 173 –