Planet Technology WGSD-1022, WGSD-8000 Syntax, 5.7.15 show interfaces status

									User’s Manual of WGSD-1022/WGSD-8000
							Flow	Admin	Back Mdix
Port	Type		Duplex Speed			Neg	control	State	Pressure Mode
--------	------------		------		-----	--------	-------	-----	-------- ----
e1	100M-Copper		Full		100	Enabled	Off	Up	Disabled Auto
e2	100M-Copper		Full		100	Enabled	Off	Up	Disabled Auto
e3	100M-Copper		Full		100	Enabled	Off	Up	Disabled Auto
e4	100M-Copper		Full		100	Enabled	Off	Up	Disabled Auto
e5	100M-Copper		Full		100	Enabled	Off	Up	Disabled Auto
e6	100M-Copper		Full		100	Enabled	Off	Up	Disabled Auto
e7	100M-Copper		Full		100	Enabled	Off	Up	Disabled Auto
e8	100M-Copper		Full		100	Enabled	Off	Up	Disabled Auto
g1	1G-Combo-C Full				1000	Enabled	Off	Up	Disabled Auto
g2	1G-Combo-C		Full		1000	Enabled	Off	Up	Disabled Auto
					Flow	Admin
Ch	Type	Speed		Neg	control	State
--------	-------	-----		--------	-------	-----
ch1	--	--	Enabled		Off	Up
ch2	--	--	Enabled		Off	Up
ch3	--	--	Enabled		Off	Up
ch4	--	--	Enabled		Off	Up
ch5	--	--	Enabled		Off	Up
ch6	--	--	Enabled		Off	Up
ch7	--	--	Enabled		Off	Up
ch8	--	--	Enabled		Off	Up

The displayed port configuration information includes the following:

ƒPort—The port number.

ƒPort Type—The port designated IEEE shorthand identifier. For example 1000Base-T refers to 1000 Mbps baseband signaling inluding both Tx and Rx transmissions.

ƒDuplex—Displays the port Duplex status.

ƒSpeed—Refers to the port speed.

ƒNeg—Describes the Auto-negotiation status.

ƒFlow Control—Displays the Flow Control status.

ƒBack Pressure—Displays the Back Pressure status.

ƒMDIX Mode—Displays the Auto-crossover status.

ƒAdmin State—Displays whether the port is enabled or disabled.

5.7.15 show interfaces status

The show interfaces status user EXEC command displays the status for all configured interfaces.

Syntax

show interfaces status [ethernet interface port-channel port-channel-numberout-of-band-eth oob-interface]

ƒInterface — A valid Ethernet port.

- 210 –