Planet Technology WGSD-1022, WGSD-8000 Syntax, Examples, Examples, Command Mode, Command Mode, User Guidelines, User Guidelines, Default Configuration, Default Configuration

User’s Manual of WGSD-1022/WGSD-8000

ƒdiscard — Discard frames with source addresses not the supplicant address.

ƒdiscard-shutdown— Discard frames with source addresses not the supplicant address. The port is also shutdown.

ƒtrap seconds — Send SNMP traps, and specifies the minimum time between consecutive traps.(Range: 1- 1000000)

Default Configuration

Discard frames with source addresses not the supplicant address. No traps.

Command Mode

Interface configuration (Ethernet) mode

User Guidelines

The command is relevant when Multiple hosts is disabled and the user has been successfully authenticated

Examples

The following example uses the forward action to forward frames with source addresses.

console config-if(Config-VLAN)# dot1x single-host-violation forward trap 100

5.29.19 show dot1x advanced

The show dot1x advanced privileged EXEC command displays 802.1X advanced features for the switch or for the specified

interface.

Syntax

show dot1x advanced [ethernet interface]

ƒinterface — Ethernet interface

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Examples

The following example displays 802.1X advanced features for the switch.

Switch# show dot1x advanced

Guest VLAN: 3978

- 377 –