User’s Manual of WGSD-1022/WGSD-8000

5.18.2 radius-server key

The radius-server key global configuration command sets the authentication and encryption key for all RADIUS communications between the router and the RADIUS daemon. To reset to the default, use the no form of this command.

Syntax

radius-server key [key-string]

no radius-server key

ƒkey-string— Specifies the authentication and encryption key for all RADIUS communications between the router and the RADIUS server. This key must match the encryption used on the RADIUS daemon. The key can be up to 128 characters long.

Default Configuration

The default is an empty string.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example sets the authentication and encryption key for all RADIUS communications between the device and the RADIUS daemon to "abc-server".

Console (config)# radius-server key abc-server

5.18.3 radius-server retransmit

The radius-server retransmit global configuration command specifies the number of times the software searches the list of RADIUS server hosts. To reset the default configuration, use the no form of this command.

Syntax

radius-server retransmit retries

no radius-server retransmit

Default Configuration

The default is 3 attempts.

Command Mode

Global Configuration mode

- 270 –