Planet Technology WGSD-1022, WGSD-8000 4.12.2 Static Address

User’s Manual of WGSD-1022/WGSD-8000

•User Name

•Password

•Confirm Password

•Local, authenticates the user at the device level. The device checks the user name and password for authentication.

•RADIUS, where authenticates the user at the RADIUS server.

•TACACS+, which authenticates the user at the TACACS+ server.

•None, assigns none authentication method to the authentication profile.

Displays the user name.

Specifies the new password. The password is not displayed. As it entered an “*” corresponding to each character is displayed in the field. (Range: 1-159 characters)

This confirms the new password. The password entered into this field must be exactly the same

as the password entered in the Password field.

Use the button when you want to add the user configuration to the Local User’s Table.

4.12.2 Static Address

A static address can be assigned to a specific interface on this switch. Static addresses are bound to the assigned interface and

cannot be moved. When a static address is seen on another interface, the address will be ignored and will not be written to the

address table (see figure 4-69)

Figure 4-69Static Address screen

The page contains the following fields:

• Interface	Displays the interface to which the entry refers:
	• Port, to which the specific port number the forwarding database

- 138 –