User’s Manual of WGSD-1022/WGSD-8000

5.27.17 switchport general map protocols-group vlan

The switchport general map protocols-group vlan interface configuration command sets a protocol-based classification rule.

To delete a classification, use the no form of this command.

Syntax

switchport general map protocols-group group vlan vlan-idno switchport general map protocols-group group

ƒgroup — Group number as defined in the map protocol protocols-groupcommand. (Range: 1 - 2147483647)

ƒvlan-id— Define the VLAN ID in the classifying rule.

Default Configuration

This command has no default configuration.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example sets a protocol-based classification rule of protocol group 1 to VLAN 8.

Console (config)# interface ethernet e8

Console (config-if)#switchport general map protocols-group 1 vlan 8

5.27.18 ip internal-usage-vlan

The ip internal-usage-vlaninterface configuration command reserves a VLAN as the internal usage VLAN of an interface. Use the no form of this command to reset to default.

Syntax

ip internal-usage-vlan vlan-id

no ip internal-usage-vlan

ƒvlan-id — VLAN ID of the internal usage VLAN.(Range: Valid VLAN)

Default Configuration

This command has no default configuration.

- 355 –