Planet Technology WGSD-1022, WGSD-8000 Syntax, Syntax, Example, Command Mode, User Guidelines, Default Configuration, 5.4.15 show bridge address-tablecount, 5.4.14 show bridge address-tablestatic

User’s Manual of WGSD-1022/WGSD-8000

5.4.14 show bridge address-table static

The show bridge address-table static privileged EXEC command displays statically created entries in the bridge-forwarding

database.

Syntax

show bridge address-table static [vlan vlan] [ethernet interface port-channel port-channel-number]

ƒvlan — Specific valid VLAN, such as VLAN 1.

ƒinterface — A valid Ethernet port.

ƒport-channel-number— A valid port-channel number.

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

In this example, all static entries in the bridge-forwarding database are displayed.

console# show bridge address-table static Aging time is 300 sec

vlan	mac address	port	type
------	--------------------	------	-------
1	0060.704C.73FF	e8	permanent
1	0060.708C.73FF	e8	delete-on-timeout
200	0010.0D48.37FF	e8	delete-on-reset

5.4.15 show bridge address-table count

The show bridge address-table count privileged EXEC command displays the number of addresses present in all VLANs or

at a specific VLAN.

Syntax

show bridge address-table count [vlan vlan]

ƒvlan — Specific VLAN.

- 179 –