User’s Manual of
The
Syntax
no
Default Configuration
The default WRR weight is 1/8 ratio for all queues (each weight set to 6).
Command Mode
Interface Configuration mode
User Guidelines
The packet refers to a threshold by the conformance level. Weighted round robin queues should be defined on the interface. Use the
Use this command to set a weight per interface.
The ratio will be like this:
The ratio for each queue is defined by the queue weight divided by the sum of all queue weights (i.e., the normalized weight). This actually sets the bandwidth allocation of each queue.
A weight of 0 means no bandwidth is allocated for the same queue, and the share bandwidth is divided among the remaining queues.
All eight queues are participating excluding the queues that are assigned as expedite queues. The weights of these queues are ignored in the ratio calculation.
All eight queues participate in the WRR exclude the expedite queues, in which case the corresponded weight is ignored (not used in the ratio calculation). The expedite queue is a priority queue, and it is serviced until empty before the other queues are serviced.
Use the
Example
The following example sets queue weights as follows:
Queue
Queue
Queue
Queue
- 259 –