User’s Manual of WGSD-1022/WGSD-8000

5.27.4 interface vlan

The interface vlan global configuration command enters the interface configuration (VLAN) mode.

Syntax

interface vlan vlan-id

ƒvlan-id— The ID of an existing VLAN (excluding GVRP dynamic VLANs).

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the VLAN 1 IP address of 131.108.1.27 and subnet mask 255.255.255.0.

Console (config)# interface vlan 1

Console (config-if)# ip address 131.108.1.27 255.255.255.0

5.27.5 interface range vlan

The interface range vlan global configuration command enters the interface configuration mode to configure multiple VLANs.

Syntax

interface range vlan {vlan-range all}

ƒvlan-range— A list of valid VLAN IDs to add. Separate non consecutive VLAN IDs with a comma and no spaces; a hyphen designates a range of IDs.

ƒall — All existing static VLANs.

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

- 346 –