Planet Technology WGSD-1022, WGSD-8000 5.7 Ethernet Configuration Commands, Syntax, Syntax, Example, Command Mode, Command Mode, User Guidelines, Default Configuration, Default Configuration

User’s Manual of WGSD-1022/WGSD-8000

5.7 Ethernet Configuration Commands

5.7.1 interface ethernet

The interface ethernet global configuration command enters the interface configuration mode to configure an Ethernet type

interface.

Syntax

interface ethernet interface

ƒinterface — Valid Ethernet port.

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example enables ports g1 for configuration.

Console(config)# interface ethernet g1

Console(config-if)#

5.7.2 interface range ethernet

The interface range ethernet global configuration command enters the interface configuration mode to configure multiple

Ethernet type interfaces.

Syntax

interface range ethernet {port-range all}

ƒport-range—List of valid ports to add. Separate non consecutive ports with a comma and no spaces; a hyphen is used to designate a range of ports.

ƒall—All Ethernet ports.

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

- 201 –