Planet Technology WGSD-1022, WGSD-8000 Syntax, Example, Command Modes, User Guidelines, Default Configuration, 5.7.17 show interfaces counters, 5.7.16 show interfaces description

User’s Manual of WGSD-1022/WGSD-8000

5.7.16 show interfaces description

The show interfaces description user EXEC command displays the description for all configured interfaces.

Syntax

show interfaces description [ethernet interface port-channel port-channel-numberout-of-band--eth oobinterface]

ƒInterface — Valid Ethernet port.

ƒport-channel-number— A valid port-channel trunk index.

ƒoob-interface— Out-of-band Ethernet port number.

Default Configuration

This command has no default configuration.

Command Modes

Privilege EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example displays the description for the interface g1.

Console# show interfaces description ethernet g1

Port	Description
------	--------------------
e1	Management_port
e2	R&D_port
e3	Finance_port

Ch Description

-----------------------

1 Output

5.7.17 show interfaces counters

The show interfaces counters user EXEC command displays traffic seen by the physical interface.

- 212 –