User’s Manual of
Default Configuration
PortFast mode is disabled.
Command Modes
Interface Configuration (Ethernet,
User Guidelines
This feature should be used only with interfaces connected to end stations. Otherwise, an accidental topology loop could cause a data packet loop and disrupt switch and network operations.
Example
The following example enables PortFast on e5.
Console(config)# interface ethernet e5
The
the no form of this command.
Syntax
shared — Specifies that the port link type is shared.
Default Configuration
The switch derives the link type of a port from the duplex mode. A
Command Modes
Interface Configuration (Ethernet,
User Guidelines
There are no user guidelines for this command.
Example
The following example enables shared
Console(config)# interface ethernet e5
- 301 –