User’s Manual of
The login authentication line configuration command specifies the login authentication method list for a remote telnet or console. To return to the default specified by the authentication login command, use the no form of this command.
Syntax
login authentication {default
no login authentication
default — Uses the default list created with the authentication login command.
Default Configuration
Uses the default set with the command authentication login.
Command Mode
Line Configuration mode
User Guidelines
Changing login authentication from default to another value may disconnect the telnet session.
Example
The following example specifies the default authentication method for a remote Telnet or console.
console (config) # line cnsole
console
The enable authentication line configuration command specifies the authentication method list when accessing a higher privilege level from a remote telnet or console. To return to the default specified by the enable authentication command, use the no form of this command.
Syntax
enable authentication {default
no enable authentication
default — Uses the default list created with the authentication enable command.
Default Configuration
Uses the default set with the command authentication enable.
- 163 –