User’s Manual of
User Guidelines
There are no user guidelines for this command, which is available only on the console line.
Examples
The following example the baud rate is set to 19200.
Console (config)# line console
The
Syntax
no
minutes — Integer that specifies the number of minutes. (Range: 0 - 65535)
seconds — Additional time intervals in seconds. (Range: 0 - 59)
Default Configuration
The default configuration is 10 minutes.
Command Mode
Line Configuration mode
User Guidelines
To specify no timeout, enter the
Examples
The following example configures the interval that the system waits until user input is detected to 20 minutes. Console (config)# line console
The show line user EXEC command displays line parameters.
Syntax
show line [console telnet ssh]
- 241 –