User’s Manual of WGSD-1022/WGSD-8000

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the number of times the software searches the list of RADIUS server hosts to 5 attempts.

Console (config)# radius-server retransmit 5

5.18.4 radius-server source-ip

The radius-serversource-ipglobal configuration command specifies the source IP address used for communication with RADIUS servers. To return to the default, use the no form of this command.

Syntax

radius-server source-ip source

no radius-server-ip

ƒsource — Specifies the source IP address.

Default Configuration

The default IP address is the outgoing IP interface.

Command Mode

Global Configuration mode

User Guidelines

To define an out-of-band IP address, use the out-of-band IP address format —oob/ip-address.

Example

The following example configures the source IP address used for communication with RADIUS servers to 10.1.1.1.

Console (config)# radius-serversource-ip10.1.1.1

5.18.5 radius-server timeout

The radius-server timeout global configuration command sets the interval for which a router waits for a server host to reply. To restore the default, use the no form of this command.

Syntax

radius-server timeout timeout

no radius-server timeout

- 271 –