User’s Manual of WGSD-1022/WGSD-8000

Console (config)# interface ethernet e8

Console (config-if)# switchport general pvid 234

5.27.13 switchport general ingress-filtering disable

The switchport general ingress-filtering disable interface configuration command disables port ingress filtering. To enable ingress filtering on a port, use the no form of this command.

Syntax

switchport general ingress-filtering disable

no switchport general ingress-filtering disable

Default Configuration

Ingress filtering is enabled.

Command Mode

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example shows how to enables port ingress filtering on e8.

Console (config)# interface ethernet e8

Console (config-if)#switchport general ingress-filtering disable

5.27.14 switchport general acceptable-frame-type taggedonly

The switchport general acceptable-frame-typetagged-onlyinterface configuration command discards untagged frames at ingress. To enable untagged frames at ingress, use the no form of this command.

Syntax

switchport general acceptable-frame-type tagged-only no switchport general acceptable-frame-type tagged-only

- 352 –