User’s Manual of WGSD-1022/WGSD-8000

Figure 4-13VLA N to Ports

The page contains the following fields:

•Port

•Mode

•Join VLAN

•VLANs

•LAG

Displays the interface number

By which indicates the port to VLAN mode. Possible field values are:

•General - By which indicates the port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1Q mode).

•Access - Indicates the port belongs to a single untagged VLAN. When a port is in Access mode, the packet types which are accepted on the port cannot be designated. Ingress filtering cannot be enabled/disabled on an access port.

•Trunk - Which indicates these ports belong to VLANs in which all ports are tagged, except for one port that can be untagged.

Defines the VLANs to which the interface is joined.

Displays the PVID tag

Indicates whether the port is a member of a LAG. If it is a member of a LAG, it cannot be configured to a VLAN. The LAG to which belongs can be configured to a

VLAN

Press the “Join VLAN” button to selecet and add VLAN to per port. The screen in Figure 4-14 appears.

- 48 –