Planet Technology WGSD-1022, WGSD-8000 Syntax, Syntax, Example, Command Mode, Command Mode, User Guidelines, User Guidelines, Default Configuration, Default Configuration, 5.17.11 qos cos override

User’s Manual of WGSD-1022/WGSD-8000

Syntax

qos cos default-cos

no qos cos

qos cos override

ƒdefault-cos— Specifies the default CoS value being assigned to the port. If the port is trusted and the packet is untagged then the default CoS value becomes the CoS value. (Range: 0 - 7)

Default Configuration

Port CoS is 0.

Command Mode

Interface Configuration (Ethernet, port-channel) command

User Guidelines

There are no user guidelines for this command.

Example

The following example configures port e5 default CoS value to 3.

Console (config)# interface ethernet e5

Console (config-if) qos cos 3

5.17.11 qos cos override

The qos cos override interface configuration command overrides the CoS of incoming packets. To disable the override, use the no form of this command.

Syntax

qos cos override

no qos cos override

This command has no arguments or keywords.

Default Configuration

CoS Override is disabled

Command Mode

Interface configuration (Ethernet, Port-Channel).

User Guidelines

This command enables to override the CoS value of tagged packets, with the value configured by the qos cos command.

- 266 –