Planet Technology WGSD-1022, WGSD-8000 5.8 GVRP Commands, Syntax, Syntax, Example, Command Mode, User Guidelines, Default Configuration, 5.8.1 gvrp enable (global), 5.8.2 gvrp enable (interface)

User’s Manual of WGSD-1022/WGSD-8000

e1	8000
e2	Disabled
e3	Disabled

5.8 GVRP Commands

5.8.1 gvrp enable (global)

GVRP, or GARP VLAN Registration Protocol, is an industry-standard protocol designed to propagate VLAN information from device to device. With GVRP, a single switch is manually configured with all desired VLANs for the network, and all other switches on the network learn these VLANs dynamically.

The gvrp enable global configuration command enables GVRP globally. To disable GVRP globally on the switch, use the no form of this command.

Syntax

gvrp enable

no gvrp enable

Default Configuration

GVRP is globally disabled.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example globally enables GVRP on the device.

Console (config)# gvrp enable

5.8.2 gvrp enable (interface)

The gvrp enable interface configuration command enables GVRP on an interface. To disable GVRP on an interface, use the no form of this command.

Syntax

gvrp enable

- 218 –