Planet Technology WGSD-1022, WGSD-8000 5.14 PHY Diagnostics Commands, Syntax, Syntax, Example, Command Mode, Command Mode, User Guidelines, User Guidelines, Default Configuration

User’s Manual of WGSD-1022/WGSD-8000

5.13.6 show management access-class

The show management access-classprivileged EXEC command displays the active management access-list.

Syntax

show management access-class

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example displays the management access-list information.

Console# show management access-class

Management access-class is enabled, using access list mlist

5.14 PHY Diagnostics Commands

5.14.1 test copper-port tdr

The test copper-port tdr privileged EXEC command diagnoses with TDR (Time Domain Reflectometry) technology the quality and characteristics of a copper cable attached to a port.

Syntax

test copper-port tdr interface

ƒinterface — A valid Ethernet port.

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

The port can only be tested if cable is connected to both sides.

The port under test should be shut down during the test, unless it is a combo port with an active fiber port.

- 247 –