User’s Manual of WGSD-1022/WGSD-8000

Figure 4-74Save Configuration via TFTP

The page contains the following fields:

„ Via TFTP

• Via TFTP Upgrade

Select this option to upgrade the switch from a file located on a TFTP

 

Server.

• TFTP Server

The TFTP Server IP Address that contains the source file to upgrade

 

from.

• Source File

Specifies the name of the upgrade file on the TFTP Server.

• Destination File

Where specifies the name of the configuration file. The default is

 

StartupCfg.

 

 

 

 

„Via HTTP

This HTTP Firmware Upgrade screen is used for saving configuration information using your Web browser. See figure 4-75

 

Figure 4-75Save Configuration via HTTP

 

 

 

 

• Upgrade

Select this option to upgrade the switch from a file on the local hard

 

drive.

- 145 –