Planet Technology WGSD-1022, WGSD-8000 Syntax, Syntax, Examples, Command Mode, Command Mode, User Guidelines, User Guidelines, Default Configuartion, Default Configuration

User’s Manual of WGSD-1022/WGSD-8000

Syntax

dot1x max-req count

no dot1x max-req

ƒcount — Number of times that the switch sends an EAP - request/identity frame before restarting the authentication process. (Range: 1 - 10)

Default Configuartion

2

Command Mode

Interface configuration (Ethernet) mode

User Guidelines

There are no user guidelines for this command.

Examples

The following example sets the number of times that the switch sends an EAP - request/identity frame, to 6

Console (config)# interface ethernet e8

Console (config-if)# dot1x max-req6

5.29.10 dot1x timeout supp-timeout

The dot1x timeout supp-timeoutinterface configuration command sets the time for the retransmission of an Extensible Authentication Protocol (EAP)-request frame to the client. Use the no form of this command to return to the default setting.

Syntax

dot1x timeout supp-timeout seconds

no dot1x timeout supp-timeout

ƒseconds — Time in seconds that the switch should wait for a response to an EAP-request frame from the client before resending the request. (Range: 1 - 65535 seconds)

Default Configuration

30

Command Mode

Interface configuration (Ethernet) mode

User Guidelines

The default value of this command should be changed only to adjust to unusual circumstances, such as unreliable links or

- 369 –