Planet Technology WGSD-1022, WGSD-8000 Syntax, Example, Example, Command Mode, Command Modes, User Guidelines, User Guidelines, Default Configuration, Default Configuration

User’s Manual of WGSD-1022/WGSD-8000

Default Configuration

The default storm control broadcast rate is 12000.

Command Mode

Interface Configuration (Ethernet)

User Guidelines

Use the port storm-control broadcast enable interface configuration command to enable broadcast storm control. The rate is rounded to the nearest 64 kbytes/sec (except 1 - 63 kbytes/sec, which is rounded to 64 bytes/sec). Note that if the rate is 0, broadcast packets are not forwarded.

Example

The following example configures the maximum broadcast rate 100 kilobytes per second.

console(config)# interface ethernet g2

console(config-if)#port storm-control broadcast rate 100

5.7.22 show ports storm-control

The show ports storm-controlprivileged EXEC command displays the storm control configuration.

Syntax

show ports storm-control [ethernet interface]

ƒethernet interface—A valid Ethernet port.

Default Configuration

This command has no default configuration.

Command Modes

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example displays the storm control configuration.

Console# show ports storm-control

Port	Broadcast Storm control [kbyes/sec]
-----	-------------------------------------------------

- 217 –