User’s Manual of
timeout — Specifies the timeout value in seconds. If no timeout value is specified, the global value is used. (Range: 1 - 30)
retransmit — Specifies the
deadtime — Length of time, in minutes, for which a RADIUS server is skipped over by transaction requests. (Range 0 - 2000)
key — Specifies the authentication and encryption key for all RADIUS communications between the router and the RADIUS server. This key must match the encryption used on the RADIUS daemon. If no key value is specified, the global value is used.
source — Specifies the source IP address to use for the communication. If no retransmit value is specified, the global value is used. 0.0.0.0 is interpreted as request to use the IP address of the outgoing IP interface. An
priority — Determines the order in which the servers are used, where 0 is the highest priority. (Range: 0 - 65535)
Default Configuration
By default, no RADIUS host is specified.
Command Mode
Global Configuration mode
User Guidelines
To specify multiple hosts, multiple
If no
The address type of the source parameter must be the same as the
Example
The following example specifies a RADIUS server host with the following characteristics:
Server host IP address — 192.168.10.1
Authentication port number — 20
Timeout period — 20 seconds
Console (config)#
- 269 –