Planet Technology WGSD-1022, WGSD-8000 Syntax, Syntax, Example, Example, Command Mode, Command Mode, User Guidelines, User Guidelines, Default Configuration, Default Configuration

User’s Manual of WGSD-1022/WGSD-8000

Syntax

ip igmp snooping host-time-out time-out

no ip igmp snooping host-time-out

Default Configuration

The default host-time-out is 260 seconds.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

The timeout should be at least greater than 2*query_interval+max_response_time of the IGMP router.

Example

The following example configures the host timeout to 300 seconds.

Console (config)# interface vlan 2

Console (config-if)#ip igmp snooping host-time-out 300

5.9.5 ip igmp snooping mrouter-time-out

The ip igmp snooping mrouter-time-outinterface configuration command configures the mrouter-time-out. The mrouter-time-outcommand is used for setting the aging-out time after multicast router ports are automatically learned. To configure the default mrouter-time-out, use the no form of this command.

Syntax

ip igmp snooping mrouter-time-out time-out

no ip igmp snooping mrouter-time-out

ƒtime-out—mrouter timeout in seconds (Range: 1 - 2147483647)

Default Configuration

The default value is 300 seconds.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the mrouter timeout to 200 seconds.

- 227 –