Planet Technology WGSD-1022, WGSD-8000 Syntax, Examples, Command Mode, 5.29.9 dot1x max-req, Default Configuration, 5.29.8 dot1x timeout tx-period

User’s Manual of WGSD-1022/WGSD-8000

exchange, to 3600.

Console (config)# interface ethernet e8

Console (config-if)#dot1x timeout quiet-period 3600

5.29.8 dot1x timeout tx-period

The dot1x timeout tx-periodinterface configuration command sets the number of seconds that the switch waits for a response to an Extensible Authentication Protocol (EAP) - request/identity frame, from the client, before resending the request. Use the no form of this command to return to the default setting.

Syntax

dot1x timeout tx-period seconds

no dot1x timeout tx-period

ƒseconds — Time in seconds that the switch should wait for a response to an EAP -request/identity frame from the client before resending the request. (Range: 1 - 65535 seconds)

Default Configuration

30

Command Mode

Interface configuration (Ethernet)

Examples

The following command sets the number of seconds that the switch waits for a response to an EAP - request/identity frame, to 3600 seconds.

Console (config)# interface ethernet e8

Console (config-if)# dot1x timeout tx-period3600

5.29.9 dot1x max-req

The dot1x max-reqinterface configuration command sets the maximum number of times that the switch sends an Extensible Authentication Protocol (EAP) - request/identity frame (assuming that no response is received) to the client, before restarting the authentication process. Use the no form of this command to return to the default setting.

- 368 –