User’s Manual of WGSD-1022/WGSD-8000

Figure 4-80Server Logs screen

There are five items, as below:

•Server

•UDP Port (1-65535)

•Facility

•Description

•Minimum Severity

Specifies the server to which logs can be sent.

Defines the UDP port to which the server logs are sent. The possible range is 1 to 65535.

The default value is 514.

Defines a user-defined application from which system logs are sent to the remote server. Only one facility can be assigned to a single server. If a second facility level is assigned, the first facility is overridden. All applications defined for a device utilize the same facility on a server. The possible field values are Local 0 - Local 7.

The field default is Local 7.

Where provides a user-defined server description.

Indicates the Minimum severity from which logs are sent to the server. For example, if Notice is selected, all logs from a Notice severity and higher are sent to the remote server.

If you want to add the Server Log configuration to the Server Log Table, use the Add to List button at the bottom of the screen.

When a severity level is selected, all severity level choices above the selection are selected "Note: automatically.

4.12.12 Memory Logs

The Memory Log screen (see figure 4-81) contains all system logs in a chronological order that are saved in RAM (Cache), Log

- 150 –