User’s Manual of WGSD-1022/WGSD-8000

• Type

The port types that comprise the LAG.

• Link Status

Shows an active connection when you choose the UP button, there is no active

 

connection or the port has been taken offline by an Admiinistrator when you choose

 

the Down button

• Speed

Shows the connection speed of the port and the speed can be configured only

 

when auto-negotiation is disabled on that port

• Duplex

The port duplex mode, Full (transmission occurs in both directions simultaneously)

 

or Half (transmission occurs in only one direction at a time). This mode can be

 

configured only when auto-negotiation is disabled and port speed is set to 10Mbps

 

or 100Mbps.

• Flow control

Shows the flow control status of the port. It is active when the port uses Full Duplex

 

Mode

• LAG Mode

Shows the current mode of the LAG interface

 

 

 

 

 

 

Click the Detail button for more detail port configuration.

„Linkl Aggregation detail configuration

At per-LAG detail configuration page, the administrator can select ports to be the members of the LAG interface. The scree

appears as follow:

- 41 –